| Home
Products
Classic
XL-15
Breeze
LightningAir
LA2
Peak
Flair
LightningAir
LA4
Eagle
5000
Ozone
Generators
LightningAir
Ionizer
LightningAir
Industrial
Mini-Mate
Auto-Mate
Replacement
Plates
Info About:
Air
Purifiers
Air
Filters
Air
Cleaners
HEPA
Filters
Alpine
Customer Info
Our
Guarantee
Human
Assistance
View Cart
Checkout
Return
Policy
Shipping
E-mail
Us |
|
Cleaning
Instructions
Ozone
Plates
Ozone plates should be cleaned
every 1 - 3 months, more often if used in a smoking household or
environment. Even with diligent cleaning and maintenance these plate(s)
wear out between 1 - 7 years depending on use and maintenance, etc.
|
Carefully remove the ozone plate
from the card cage by grasping the middle of the edge nearest to you
and slowly pull it straight out.
Clean the plate with hot water and
ammonia in a 50/50 solution. You may use a toothbrush if needed,
scrubbing gently to avoid fractures. Rinse with hot water and allow to
dry completely. A hair dryer may be used if needed.
MAKE SURE PLATES ARE DRY BEFORE
REINSTALLING INTO UNIT.
Reinstall plate gently, making sure that
the electrical tabs are in contact with the plate. Turn on unit to
ensure proper placement. If the unit begins to produce ozone,
you have cleaned and installed the plates properly.
|
 |
 |
Plate
Card Cage
Before installing new or cleaned
plates, be sure to clean the white stand-off's at the corners of the
plate card cage. The easiest way to do this is with a cotton swab and
alcohol. Once this area is clean, insert new or cleaned plates into
the slot as before.
Please call customer service if you have
any questions:
1-406-889-5288 |
|
 |
 |
• 3
Yr Warranty
• Up to 5000 sq ft
• For Use In Homes
• For Use In Bars
• For Use In RV's
• Ozone Options
• Uses low power
• Plug and go
|
|
|
|
